Henkelman Jumbo Plus - 6. Maintenance; 6.1. Maintenance diagram

28
USER MANUAL
Jumbo Version: JUM-EN-UL-0 23-03-15
6. MAINTENANCE
ATTENTION!
 Always disconnect the power supply by unplugging the power cord
 Test the machine after maintenance or repairs, so it is certain that the machine
can be safely used
 Only trained personnel should perform the described maintenance work
6.1. Maintenance diagram
The diagram below shows the maintenance activities that must be performed.
ACTIVITY
LUBRICANT
Daily
Weekly
Every 6 months
Yearly
Every 4 years
SECTION
Cleaning
Cleaning the machine
6.2
Lubrication
Replace the oil of the vacuum pump
See chapter 1 for
oil type
1
Inspecties
Check the oil level
2.3
Execute the oil cleaning program
6.3
Inspect the seal bars
6.6
Inspect the silicone rubber of the silicone holders
6.7
Inspect the lid seal
6.8
Check the plastic lid for cracks