Henkelman Jumbo Plus - 6.3. Oil cleaning program; 6.4. Add oil; change oil

30
USER MANUAL
Jumbo Version: JUM-EN-UL-0 23-03-15
6.3. Oil cleaning program
EXPLANATION
 The oil cleaning program will let the vacuum pump run for 15 minutes.
During the program, the pump and the oil will reach the operating temperature.
The oil absorbs fluid in the pump. The high temperature ensures that the moisture
evaporates in the pump and reduces the risk of corrosion
 If you pack moist products, such as soups or sauces, it is necessary to use the oil
cleaning program more often than the prescribed interval of once a week
NO.
WHAT TO DO
ACTION
RESULT
1
Select the program
 Press the key for the oil cleaning program
(Figure 5:3)
2
Start process
 Close the lid
The oil cleaning program
will be executed for 15
minutes
6.4. Add oil / change oil
WARNING
 The oil in the vacuum pump can be hot. When replacing the oil contact with
hot oil may be possible
EXPLANATION
If the machine will not be used for long periods of time, the oil should be removed from
the pump. This is because any moisture and dirt in the oil can affect the pump,
causing the pump to jam at the next use