HERMOS AG
Gartenstraße 19 • 95490 Mistelgau
Phone: +49 9279 991 - 0
E-mail: rfid@hermos.com
back to the table of contents
12.3 Safety instructions
All components of the antenna oscillating circuit carry high voltage.
Only use spare parts specified by the manufacturer.
Unauthorised substitution of parts can result in fire, electric shock or other
hazards.
Electrostatic charges damage electronic components within the device.
ESD protective measures must be applied prior to opening the unit.
Carefully remove the housing covers to prevent damage.
Do not operate the device when the housing is open.
Never short circuit the fuse! This may result in fire or damages on the
device. Only use fuses specified by the manufacturer.
To Next Page
Loading...