HERMOS AG
Gartenstraße 19 • 95490 Mistelgau
Phone: +49 9279 991 - 0
E-mail: rfid@hermos.com
back to the table of contents
10.4.13 I – Adjust RF module
It is necessary to adjust the RF module in ordert to adapt an antenna tot he ambient conditions
optimally. The tuning achieves an optimal read / write range for the present installation
environment. Tuning is performed one at a time for each antenna port and the determined
tuning value is stored for each antenna.
For optimal results, the vote should be automatic, but the voting value can also be set
manually.
To start the auto-tuning process, select the value 08.
Example: I108 … automatic tuning of antenna 1
If the reader can not determine the appropriate calibration, the error „5 - Invalid“ is sent instead
of the confirmation.
To Next Page
Loading...