HERMOS AG
Gartenstraße 19 • 95490 Mistelgau
Phone: +49 9279 991 - 0
E-mail: rfid@hermos.com
back to the table of contents
7.5.3 Connecting the antenna
Connect the antenna at the antenna connection at the rear of the
reading unit. Observe the label here.
Use the antennas and antenna cable from the manufacturer to ensure
optimum reading and writing ranges.
7.6 Power Supply
The device can be connected to the system‘s internal power supply or an external power
supply.
There are risks if the device is supplied with the incorrect voltage.
Only use cables, plugs and adapters from the manufacturer.
Observe power ratings provided in the technical data.
If the device is connected to the power supply, the power LED lights up.
To Next Page
Loading...