HERMOS AG
Gartenstraße 19 • 95490 Mistelgau
Phone: +49 9279 991 - 0
E-mail: rfid@hermos.com
back to the table of contents
10.4.14 J – RF module Queries the vote
The command „J“ can be used to query the tuning values of the individual antennas. Each
antenna port has its own tuning value.
The tuning value is a set value for the optimal antenna tuning.
For optimum read and write ranges, the value is automatically determined by the reader
(I-message). The value is measured in 16 steps (0-F).
To Next Page
Loading...