HERMOS AG
Gartenstraße 19 • 95490 Mistelgau
Phone: +49 9279 991 - 0
E-mail: rfid@hermos.com
back to the table of contents
10.4.15 A – Sensor event object removed
The message of sensor events can be activated in the parameter „Watch-Port“ (par. 07). If this
is activated, the reader reports every drop of the external sensor.
The sensor message must be confirmed by the host.
The sensor event is detected after an adjustable delay time (par. 0 Sensor Delay). During the
delay time, the sensor signal must be stable.
In parameter 1 „Read Mode“ the sensor can be deactivated.
To Next Page
Loading...