HERMOS AG
Gartenstraße 19 • 95490 Mistelgau
Phone: +49 9279 991 - 0
E-mail: rfid@hermos.com
back to the table of contents
10.4.16 B – Sensor event object detected
The message of sensor events can be activated in the parameter „Watch-Port“ (par. 07). If this
is activated, the reader reports any recognition of the external sensor.
The sensor message must be confirmed by the host.
The assignment of the external sensor results in an automatic reading and
is not sent as a sensor event in standard ASC-I1 mode. In the ASC-W1
mode, however, a sensor event B is present.
In parameter 1 „Read Mode“ the sensor can be deactivated.
To Next Page