HERMOS AG
Gartenstraße 19 • 95490 Mistelgau
Phone: +49 9279 991 - 0
E-mail: rfid@hermos.com
back to the table of contents
Parameters:
In the "Parameters" tab you can choose from a list of parameters that can be read and
written.
CAUTION
When setting and reading parameters, it must be carefully considered
which communication protocol is currently set. Some parameters are
defined differently in different protocols.
LF Module:
In the register "LF Module" a test reading can be carried out. One or more pages of a
multipage transponder can be read out. The success code of the triggered reading is
displayed in the status bar at the bottom of the window. Via a scan, the first page of every
readable 134.2 kHz LF transponder is read out and displayed.
To Next Page
Loading...