HERMOS LFM 4x - Page 47

HERMOS AG
Gartenstraße 19 • 95490 Mistelgau
Phone: +49 9279 991 - 0
E-mail: rfid@hermos.com
LFM 4x Reader Rev1.4
back to the table of contents
46
www.hermos.com
Customer manual
LFM 4x Reader
RFID
WE GENERATE SOLUTIONS
Device-Settings:
Command
Description
G
Query Parameter
F
Query Parameter (Device is operated in ASC-W1 mode)
P
Set Parameter
N
Reset
e
Error message
E
Error message (Device is operated in ASC-W1 mode)
H
Heartbeat
V
Software-Version
L
Lock side of a transponder
l
Coordinate RF-modules
J
Querying the coordination of the RF-module
In- and Output:
Command
Description
O
Set Output
Q
Query Output/Input State
A
Sensor event: Sensor removed
B
Sensor event: Sensor detected (Device is operated in ASC-W1
mode)
For customer-specific device variants (->Factoryparametersets),
another reader can be connected to the RS232 interface.
The commands specified for this device are not part of this
documentation.