HERMOS AG
Gartenstraße 19 • 95490 Mistelgau
Phone: +49 9279 991 - 0
E-mail: rfid@hermos.com
back to the table of contents
Parameter is without further function.
Range: 00-01
Default: 1
Transponder charging time in milliseconds.
Range: 00-FF
Default: 32(50ms)
Realisation: a separate parameter for each port *)
Parameter is without further
function. Range: 00-03
Default: 1
Parameter is without further
function. Range: 00-03
Default: 1
Parameter is without further function.
Range: 00-FF
Default: 0
Parameter is without further
function. Bereich: 00-FF
Default: 0
Type of sensor signal to start an automatic read. The setting is
applied for the addressed sensor.
0 … read process when sensor is covered
1 … read process when sensor is uncovered
Default: 0
Realisation: a separate parameter for each port *)
To Next Page
Loading...