EasyManua.ls Logo

Heska element COAG+ - 5.6 Warning Information on Built-In Lithium Battery

Heska element COAG+
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
5.6 Warning Information on Built-In Lithium Battery
The Element COAG+ has a built-in lithium battery, which cannot be
removed by any user.
The user must use the matching 5V special charger provided by
Heska to charge.
Do not bring the analyzer close to a high-temperature heat source.
Do not allow the analyzer to be hit or exert heavy pressure on the
analyzer.
If it is found that there is leakage from the battery cover on the back
of the analyzer, direct skin contact should be avoided as much
as possible. In case of accidental contact with skin due to battery
leakage, please rinse with water. If your eyes come into contact
with battery liquid, you should also seek medical care.
The battery should be disposed of with the analyzer in accordance
with local regulations.