26
Angle: The light eld should be as perpendicular to the barcode plane as
possible, and the vertical deviation should have the highest recognition
rate within ±5°.
8.5 Install Codechip
Insert the test strip Codechip into
the chip slot (see Section 1.3 for
position details), then the specic
Codechip information will display
(Figure 3-5). Codechip number and
arrow side should be face up.
When the input Codechip number
of the test strip does not match the
Codechip information, the system
will deliver a warning message
indicating that the Codechip
information does not match.
3-5
3-6
To Next Page
Loading...