43
11.1.6 Visually verify that no residual moisture is on the analyzer or sample
area.
11.2 Precautions for Lithium-Ion Battery
Element COAG+ Analyzer has a built-in lithium-ion battery, which cannot
be removed by any user. For battery replacement, please contact Heska's
Technical Support Services.
If you plan not to use the analyzer for more than one month, please fully
charge the analyzer. Turn on the transportation mode in the Settings
screen, and then turn off for storage. Please charge the analyzer for 3.5
hours before using.
When stored for more than 3 months, it is recommended to turn on
the transportation mode after charging every 3 months to avoid battery
discharge and capacity attenuation.
11.3 Servicing
No user serviceable components. All service and adjustments
must be performed by Heska Corporation.
To Next Page
Loading...