Heska element COAG+ - 9.2 Input Test Strip Information; 9.3 Install Test Strip Codechip

32
9.2 Input Test Strip Information
After the test strip is inserted, please
enter the Test Strip Information
screen, and input the Codechip
number of the test strip (Figure
4-2). The Codechip number can
be manually entered and then click
" " to save, or by scanning the
barcode on the package of the test
strip. The package of the test strip
bears the Codechip number of the
test strip. The Codechip number
of the test strip must be entered,
or the system will deliver a warning
message indicating the input is
invalid when Save is clicked.
9.3 Install Test Strip Codechip
Insert the test strip Codechip into
the chip slot (see Section 1.3 for
position details), then the specic
Codechip information will display
(Figure 4-3).
4-2
4-3