Heska element COAG+ - 9.4 Input QC Information; 9.5 Install QC Liquid Codechip

34
9.4 Input QC Information
After the Codechip is installed,
enter the Codechip number of the
QC liquid (Figure 4-6). (See outer
package for details.) The Codechip
number can be entered manually
and then click " " to save, or
by scanning the barcode on the
package of the test strip. The
Codechip number of the QC liquid
must be entered, or the system
will display a warning message
indicating that the input is invalid
when Save is clicked.
9.5 Install QC Liquid Codechip
The screen will display the specic
Codechip information of the QC
liquid (Figure 4-7) after inputting the
Codechip information of the QC
liquid.
4-6
4-7