36
9.7 Add Sample
The system will count down and
prompt the user to add sample
(Figure 4-11) upon the completion of
heating. The sample must be added
within 10 minutes. Please strictly
follow the requirements of the QC
liquid insert during sample adding.
Do not move the instrument when
adding sample. If the sample is not
added properly within 10 minutes,
the system will deliver an error
message indicating sample adding
has timed out.
9.8 QC Test
After the QC liquid is added,
the system will start the QC test
automatically and display the test
progress (Figure 4-12).
4-11
4-12
To Next Page
Loading...