Specifications Page 1-8
L000950, Version: 4.0 February 2016
Interface
USB 2.0 (high speed)
Ethernet with internal print server
Interfacing information for E-card Options
InTM Film Options
Clear Film, 1,500 prints
Standard Holographic (500 prints)
Custom Holographic, special order (500 prints)
High Durable Clear Film (1,000 prints)
InTM Film Storage
Temperatu re
77 °F (25 °C) or lower for no longer than 1.5 years.
Locks
Hardware locks are a optional feature.
• Mechanical and key locks are used to secure the doors on the input card
cartridges, the access door to the printer, the access door to the
Laminator and the output card Hopper.
• The input card cartridges are manually secured to the printer mechanism
through the toggle latch located inside the access door of the printer.
• The Printer and Laminator include a compatible hole with a Kensington
lock.
Memory
16 MB RAM
64MB (HDP5600 only)
MS Windows
Compatibility
•Windows XP
•Server 2003
• Vista (32 & 64 bit)
• Windows Server 2008 (32 & 64 bit)
• Windows 7 & 8, 8.1, 10 (32 & 64 bit)
• Windows Server 2008 R1, R2
• Windows Server 2012
Operating Conditions
Operating Temperature: 65° to 90° F (18° to 32° C)
Humidity: 20 - 80% non-condensing
Options
• Card Lamination Module – single-sided or double sided
• Flipper Module
• Magnetic stripe encoding
• Dual Input hopper
• Smart card encoding (contact/contactless)
• Contactless 13.56MHz encoding option
• Contact chip encoding option
• Door and cartridge locks
• Printer cleaning kit
Overlaminate Options
All overlaminate options are available in either clear, holographic globe design
or custom holographic design. They can also be optimized for use with smart
cards and Magnetic Stripes.
Here are the options:
• Thermal Transfer Overlaminate, .25 mil thick, 500 prints
• PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250 prints, (clear,
standard holographic and custom holographic)
Component Description
To Next Page
Loading...
