February 2016 L000950, Version: 4.0
Page 1-9 Specifications
Print Area
Over-the-edge on CR-80 cards.
Print Colors
Up to 16.7 million and 56 shades per pixel
Print Method
HDP Dye-Sublimation/ Resin Thermal Transfer
Print Modes
Print Head options:
Note: Both Normal and Performance are 300 DPI in both the short and long
dimensions of the card
• Normal print mode (default)
• Performance print mode is faster with lower image quality and is most
suitable for minimal color with mostly resin text.
HDP5600/600 DPI print head only:
• Normal mode is 600 DPI in the short dimension, but effectively 300 DPI in
the long dimension (default)
• Premium mode is a full 600 DPI in both the short and the long dimensions
of the card.
Print Resolution
300 dpi (11.8 dots per mm) continuous tone
600 dpi (HDP5600 only)
Print Ribbon Options
Prints or Images:
• YMC, 750 prints
• YMCK* 500 prints
• YMCKK* 500 prints
• YMCKH* 500 prints
• YMCFK, 500 prints
• YMCKI, 500 prints
• YMCIKH, 375 prints
• YMCKIKI, 375 prints
• YMCK Half panel, 1000 prints
• YMCKK Half Panel, 750 prints
• Premium Black Resin (K) 3000 prints
*Indicates the Ribbon type and the number of Ribbon panels printed where
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, H=Heat Seal, I=Inhibit, and
F=Fluorescing
Print Speed in Normal
Mode
• YMC - 29 seconds per card/ 124 cards per hour
• YMCK - 35 seconds per card/ 103 cards per hour
• YMCKK - 49 seconds per card/ 73 cards per hour
• YMCK+Lam - 40 seconds per card/ 90 cards per hour
• YMCKK+Lam - 55 seconds per card/ 65 cards per hour
Print Speed in
Performance Print Mode
Note: Performance is most suitable for minimal color and mostly resin text.
• YMC - 24 seconds per card/ 150 cards per hour
• YMCK - 29 seconds per card/ 124 cards per hour
• YMCKK - 40 seconds per card/ 90 cards per hour
• YMCK+Lam - 34 seconds per card/ 106 cards per hour
• YMCKK+Lam - 48 seconds per card/ 75 cards per hour
Component Description
To Next Page
Loading...
