6. Troubleshooting and check
6-8
3) Motor bearing: Replace the motor at rated speed and rated load based on 20,000 to 30,000
hours. Since the bearing of the motor depends on the operating conditions, replace it even if
you find abnormal noise or abnormal vibration during inspection.
[Standard replacement years of parts]
Standard
replacement
years
replacement method, others
Replacement with new boards
(decision after inspection)
decision after inspection
Replacement with new boards
decision after inspection
Aluminum Electrolytic Capacitors on
Printed Boards
Replacement with new boards
(decision after inspection)
6.5. Preservation
6.5.1. Servo Motor
If you do not use it right away, please keep the following things in mind.
1) Keep in a clean and dry place.
(Caution!) No condensation or freezing
To Next Page
Loading...
Need help?
General
