1. Model check and handling
1-34
(6) Maintenance check. Parts exchange
•Electrolytic capacitors have a reduced capacity due to deterioration. It is recommended to
replace the electrolytic capacitor every 10 years when using it in a normal environment to
prevent secondary accidents caused by malfunctions. Please contact our sales team.
•Do not perform a mega test (insulation resistance measurement) on the servo drive.
It may cause failure.
(7) Waste disposal
•Dispose of as general industrial waste.
(8) Caution
•All illustrations in this manual are depicted with the cover removed for safety, or the safety
barrier removed. When operating the product, make sure that the cover and the obstruction
are intact. Please drive accordingly.
To Next Page
Loading...