Hikmicro HM-TM36-LG/D - 3.8.8 DPC

30
Device
Address
Class
Command
Address
Subclass
Command
Address
Read/Write
Standard
Attached Data
Remark
0x36
0x78
0x03
0x00
0 to 100, 50 by
default.
Contrast
Return:
Device
Address
Class
Command
Address
Subclass
Command
Address
Return
Standard
Attached Data
Remark
0x36
0x78
0x03
0x03
N/A
3.8.8 DPC
Dead Pixel Correction:
Device
Address
Class
Command
Address
Subclass
Command
Address
Read/Write
Standard
Attached Data
Remark
0x36
0x78
0x1A
0x00
Dead pixel
command
Perform the DPC function
Return:
Device
Address
Class
Command
Address
Subclass
Command
Address
Return
Standard
Attached Data
Remark
0x36
0x78
0x1A
0x03
N/A
The dead pixel can be corrected by following ways:
1. Menu interface: For the detailed information, refer to Chapter 5. Key Operation.
2. Client software: For the detailed information, refer to the Help of Client Software.
3. Serial port command:
a. Turn on the cursor: F0 05 36 78 1A 00 0F D7 FF
b. Move the cursor to the dead pixel:
--Move coordinates upwards: F0 05 36 78 1A 00 02 CA FF
--Move coordinates upwards for N digits: F0 05 36 78 1A 00 2x CHK FF (X is offset, CHK is verification
bit)
--Move coordinates downwards: F0 05 36 78 1A 00 03 CB FF
--Move coordinates downwards for N digits: F0 05 36 78 1A 00 3x CHK FF (X is offset, CHK is verification
bit)