HikRobot MV-CL021-40GM - Page 121

GigE Line Scan Camera·User Manual
112
Converter
Control
Signal Alignment
Converter Control
Trigger Line Rate (Hz)
PreDivider
Multiplier
PostDivider
Resulting Trigger Line Rate (Hz)
Shading
Correction
Shading Selector
Section Set Flat Field
Correction
Activate Shading
NUC Enable
PRNUC Enable
PRNUC ROI Enable
PRNUC Width
PRNUC Offset X
FPNC User Enable
PRNUC User Enable
PRNUC User Selector
PRNUC Target Enable
PRNUC Target R
PRNUC Target G
PRNUC Target B
PRNUC Smooth Enable
Line Rate Ratio
Section Set Space Correction
Pixel Shift
Parallax Direction
Digital IO
Control
Line Selector
Section I/O Output
Line Mode
Line Format
Line Status