GigE Line Scan Camera·User Manual
44
The camera’s height parameter is 4 in the sequence diagram above.
Set Strobe Line Pre Delay
The camera also supports the function of strobe line pre delay, which means that the strobe signal
takes effect early than exposure. This function is applied to the external devices that have slow
response speed.
Click Digital IO Control > Strobe Line Pre Delay, and enter Strobe Line Pre Delay according to
actual demands.
Figure 8-8 Set Strobe Line Pre Delay
The sequence diagram of strobe line pre delay is shown below.
Figure 8-9 Sequence Diagram of Strobe Line Pre Delay
The camera’s height parameter is 4 in the sequence diagram above.
To Next Page
Loading...
