GigE Line Scan Camera·User Manual
78
Figure 10-42 Before PRNUC Correction
Figure 10-43 After PRNUC Correction
Global PRNUC Correction
For MV-CL021-40GM camera, follow steps below to operate:
Steps:
1. Click Shading Correction, and click Execute in Activate Shading.
2. Enable NUC Enable, and PRNUC Enable will be enabled automatically.
Figure 10-44 Set Shading Correction (I)
For MV-CL022-40GC camera, follow steps below to operate:
Steps:
1. Click Shading Correction, and set PRNUC target related parameters according to actual
demands.
To Next Page
Loading...
