User Manual of Network Fisheye Camera
26
5. Click the icon to save the current patrol path.
Note: Up to 32 patrol paths can be set, and each path supporting 16 key points at
most.
Calling a Patrol
Steps:
1. Click to select a PTZ View on the display window.
2. Select the patrol path number from the drop-down list.
3. Click the icon to call the selected patrol path.
Deleting a Patrol
1. Select the patrol path number from the drop-down list.
2. Click the icon to delete the key point of the patrol path one by one.
You can also click the icon to directly delete the patrol path.
To Next Page
Loading...
