DS-7108HI-S series Net DVR User Manual
19
Fig. 4.5 Main menu
Step 2: Select the target user name by using [↑]/[↓], then move the “Active Frame” to
“Password” icon by using[]/[]keys. As shown in Fig.4.6 below.
Fig. 4.6 Modify user’s password
Step 3: Input new password
Use numeric keys to input new password. The password can be null. It also can be 16
numerals. Press [ENTER] to exit edit box, and move to “Verify” item to verify password.
Note: In edit box, use []/[]to move cursor and[EDIT]key to delete the numeral in
front of the cursor.
Step 4: Modify password successfully
Move the “Active Frame” to “Confirm” button, press [ENTER] key. If the password is
modified successfully, you will turn to the main menu. Or an error dialog will pop up. You can
repeat step 3 to modify again.
To Next Page
Loading...
