User Manual of DS-7200/7300/8100 Series DVR
151
9.2 Configuring Advanced Settings
9.2.1 Configuring Extranet Access
You can choose the access to the DVR by EZVIZ Cloud P2P or by DDNS through the settings on the Extranet
Access menu.
By default, the EZVIZ Cloud P2P is enabled.
Configuring EZVIZ Cloud P2P
Purpose:
EZVIZ Cloud P2P provides the mobile phone application and as well the service platform page to access and
manage your connected DVR, which enables you to get a convenient remotely access to the surveillance
system.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the Extranet Access tab to enter the EZVIZ Cloud P2P Settings interface.
3. Check the Enable EZVIZ Cloud P2P checkbox to activate this feature.
4. If required, check the Enable Stream Encryption checkbox to encrypt the video stream.
5. Enter the verification code of the device.
The verification code consists of 6 capital letters and is located at the bottom of the DVR.
The device at the version 3.0.1 or above has its verification code automatically available in the
filed by default; for device of older version, you need to input any 6 capital letters in the text filed.
Figure 9. 7 EZVIZ Cloud P2P Settings Interface
6. Click the Apply button to save and exit the interface.
After configuration, you can access and manage the DVR by your mobile phone on which the EZVIZ Cloud
P2P application is installed or by the ezviz website (www.ezviz7.com).
To Next Page
Loading...
Need help?
General
