EasyManuals Logo

HIKVISION DS-7200 User Manual

HIKVISION DS-7200
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #182 background imageLoading...
Page #182 background image
User Manual of DS-7200/7300/8100 Series DVR
181
10.5 Checking HDD Status
Purpose:
You may check the status of the installed HDDs on device so as to take immediate check and maintenance in case
of HDD failure.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
2. Check the status of each HDD which is displayed on the list.
Figure 10. 17 View HDD Status (1)
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or Abnormal, please
initialize the HDD before use. And if the HDD initialization is failed, please replace it with a new one.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the System Information interface.
Menu > Maintenance > System Info
2. Click the HDD tab to view the status of HDD displayed on the list.
Figure 10. 18 View HDD Status (2)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7200 and is the answer not in the manual?

HIKVISION DS-7200 Specifications

General IconGeneral
Hard Disk1 SATA interface
Video Input4/8/16 channels
Video Output1 HDMI, 1 VGA
Audio Output1 channel, RCA
HDD CapacityUp to 6TB
Network ProtocolsTCP/IP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP
Network Interface1 RJ45 10M/100M adaptive Ethernet interface
USB Interface2 USB 2.0
Working Temperature-10 °C to 55 °C (14 °F to 131 °F)
Video CompressionH.264+
Encoding Resolution1080p/720p/4CIF/CIF

Related product manuals