HIKVISION DS-7200 User Manual

User Manual of DS-7200/7300/8100 Series DVR
93
Figure 5. 33 Encoding Record
2) Select Camera you want to configure.
3) Check the checkbox of the Redundant Record.
 The Redundant Record option is only available when the HDD mode is Group.
 The redundant record is used when you want to save the record files in the redundant HDD.
You must configure the redundant HDD in HDD settings. For detailed information, see
Chapter 10.3.2 Setting HDD Property.
4) Click Apply to save settings and back to the upper level menu.
5) Repeat the above steps2)-4) for configuring other channels.

HIKVISION DS-7200 Specifications

General

Hard Disk	1 SATA interface
Video Input	4/8/16 channels
Video Output	1 HDMI, 1 VGA
Audio Output	1 channel, RCA
HDD Capacity	Up to 6TB
Network Protocols	TCP/IP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP
Network Interface	1 RJ45 10M/100M adaptive Ethernet interface
USB Interface	2 USB 2.0
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Video Compression	H.264+
Encoding Resolution	1080p/720p/4CIF/CIF