DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
32
Figure 21 Live Feed Mode
The settings you may adjust with each display include:
Manual Record:
Enable/disable manual record by clicking the icon for a selected display.
Instant Playback:
Click the Instant playback icon to show the record in last five minutes. If no record is found, it means
there is no record during the last five minutes
Audio:
Enable/disable audio for a selected display. To enable/disable audio:
1. Select one display to enable/disable audio.
2. Enable audio by clicking the Enable Audio icon and disable audio by clicking the Disable Audio
icon. An error message similar to the one shown in Figure 22 will pop-up if the Enable Audio
option is not selected in the Live View menu for the specified channel.
Figure 22 Enable Audio Attention Message
Capture:
Do capture by clicking the icon for a selected display.
PTZ Control:
If the selected camera is a PTZ camera, you may control it directly from the display. Control a PTZ
camera as following steps:
Steps:
1. Select the display that corresponds to a PTZ camera.
2. Click the PTZ Control icon. This will bring up additional PTZ control buttons, as shown in
Figure 23.
To Next Page
Loading...
Need help?
General