DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
35
Figure 26 IP camera Image Settings Menu
3. For analog camera, there are four preset modes for selection: Standard, Indoor, Dim Light and
Outdoor. You can select one according to the real situation.
4. You can also adjust the image parameters like Brightness , Contrast , Saturation ,
Hue , Sharpness and Denoising by dragging the corresponding icon. The affect will
be displayed immediately on the screen.
Click Default will restore the default settings.
If the same settings can be applied in other channels, click the Copy button to pop-up a Copy
to box and check the corresponding checkbox. Click the OK button to save and back to
Image Setting menu. Click Cancel to exit without saving.
Click OK to save the settings and return to the Live Feed mode.
5. For IP camera, only Customize is supported. You can adjust the Brightness, Contrast, Saturation
and Hue by dragging the corresponding icon. Click the OK button to save the settings and back to
the Live Feed mode.
You can also enter the Image setting menu by going to Menu > Cameras Setup > Image, as shown in
Figure 27. The steps are similar to the live feed icon setting steps. If the same settings can be applied in
other channels, click the Copy button to copy it to other channels.
Figure 27 Image Settings Menu
To Next Page
Loading...
Need help?
General