DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
49
3) Repeat the above steps to set record schedule for other days in the week.
4) Click the Apply button to save the settings or click to exit without saving.
6. Repeat the above steps to set record schedule for other channels. If the same schedule can be
applied to other channels, click the Copy button to pop-up a Copy to box, as shown in Figure 44.
Figure 44 Copy to
7. Check the corresponding checkbox of other channels to copy the record schedule to.
8. Click the OK button to save the setting and back to upper level menu or click the Cancel button to
back without saving.
9. Click the Apply button to save the settings.
Note:
Enable the Start Recording in the Display Menu will also create a schedule in Schedule Configuration. It
will start all-day continue or event recording for all channels.
To Next Page
Loading...
Need help?
General