DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
80
Figure 80 Handing Settings Menu
To set other actions, including:
Full Screen Monitoring: DVR will display the video image in full screen when motion is
detected.
Audible Warning: DVR will sound an audio warning if motion is detected in the designated
regions of the camera.
Notify Surveillance Center: DVR will notify surveillance center when motion is detected.
Send Email: DVR will send an email out to the designated recipients when motion is
detected. Please refer to configure email settings on Page 83 for details.
Trigger Alarm Output: DVR will trigger alarm output when motion is detected. When you
check the Trigger Alarm Output checkbox, there will display a choose box to select Alarm
Output No., as shown in Figure 81.
Figure 81 Trigger Alarm Output Settings Menu
8. Select the Apply button to save the motion detection settings and select OK to return to the
previous menu. Selecting the Cancel button without clicking Apply or OK will quit out of the
menu without saving settings.