HIKVISION DS-K1T341C Series

Note
If authencaon is failed in the congured me duraon, the device will broadcast the
congured content.
3) Enter the audio content.
4)
Oponal: Repeat substep 1 to 3.
5) Oponal: Click to delete the congured me duraon.
9.
Oponal: Add holiday schedule.
1) Click Add to add holiday schedule.
2) Repeat step 3 to 6.
10.
Click Save to save the
sengs.
8.5.15 Set Image Parameters
Set the video standard, WDR, image adjustment, supplement light, beauty, and image fusion.
Steps
1.
Click Conguraon → Image .
2.
Congure the parameters to adjust the image.
Video Standard
Set the video frame rate when performing live view remotely. Aer changing the standard,
you should reboot the device to take
eect.
PAL
25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East
countries, Europe countries, etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the
Philippines, etc.
WDR
Enable or disable the WDR
funcon.
When there are both very bright and very dark areas simultaneously in the view, WDR
balances the brightness level of the whole image and provide clear images with details.
Brightness/Contrast/Saturaon/Sharpness
Drag the block or enter the value to adjust the live video's brightness, contrast, saturaon,
and sharpness.
Supplement Light Parameters
Set the supplement light type from the drop down list and select to enable or disable it.
If you select On, you can set the light brightness.
If you select Schedule, you can set the light brightness and its schedule.
DS-K1T341C Series Face Recognion Terminal User Manual
106