Access Control Terminal·User Manual
43
Steps:
1. In the access controller editing interface, click Network Settings button to
enter the network settings interface.
2. Click the Uploading Mode Settings button.
3. Select the center group in the dropdown list.
4. Tick the Enable to enable the selected center group.
5. Select the report type in the dropdown list.
6. Select the uploading mode in the dropdown list. You can enable N1/G1 for
the main channel and the backup channel, or select off to disable the main
channel or the backup channel.
The main channel and the backup channel cannot enable N1 or G1 at the same
time.
7. Click the OK button to save parameters.
To Next Page
Loading...
