Access Control Terminal·User Manual
44
Network Center Settings
Steps:
1. In the access controller editing interface, click Network Settings button to
enter the network settings interface.
2. Click the Network Center Settings button.
3. Select the network center in the dropdown list.
4. Input IP address.
5. Input port number.
6. Select the protocol type.
7. Set an account name for the network center. A consistent account should
be used in one platform.
8. Click the OK button to save parameters.
• In the Ehome protocol, the default port number is 7661, and the port type
should be UDP port. Related settings files need modifying if the port type
does not match.
• The port number of the wireless network and wired network should be
consistent with the port number of Ehome.
To Next Page
Loading...
