HIKVISION DS-PHA20-W2P

Figure 4-4 Cellular Data Network Sengs Page
3. Enable Wireless Dial.
4. Set the cellular data network parameters.
Access Number
Input the operator dialing number.
User Name
Ask the network carrier and input the user name.
Access Password
Ask the network carrier and input the password.
APN
Ask the network carrier to get the APN
informaon and input the APN informaon.
Data Usage Limit
You can enable the funcon and set the data threshold every month. If data usage is more
than the
congured threshold, an alarm will be triggered and uploaded to the alarm center
and mobile client.
Data Used This Month
The used data will be accumulated and displayed in this text box.
5. Click Save.
Hybrid Security Control Panel User Manual
13