HIKVISION DS-TCL400-E - Set OSD

Note
The higher the ROI level is, the clearer the image of the detected area is.
5.
Click Save.
6.
Oponal: Select other area codes and repeat the steps above if you need to draw mulple xed
areas.
6.5 Set OSD
You can customize OSD informaon on the live view.
Steps
1.
Go to
Conguraon → Device Conguraon → Text Overlay → Video .
Figure 6-4 Set OSD
2.
Set OSD property, font size, alignment, etc.
3.
Oponal: Set the display content.
1) Check Camera Name and enter the name.
2) Check Display Date, and set the
me and date format.
3) Check Display Week.
4) Check Display Parked Status.
4.
Oponal: Check the display item(s) and enter the informaon in the text eld(s).
5.
Drag the red frames on the live view image to adjust the OSD posions.
Smart On-Street ANPR Camera User Manual
26