HIKVISION DS-TCL400-E - Chapter 11 Maintenance; View Device Information; Enable System Log Service; Upgrade

Chapter 11 Maintenance
11.1 View Device Informaon
Basic Informaon and Algorithms Library Version
Go to Conguraon → Device Conguraon → System Conguraon → Device Informaon to
view the basic
informaon and algorithms library version of the device.
You can edit Device Name and Device No. The device No. is used to control the device. It is
recommended to reserve the default value.
Device Status
Go to Conguraon → Device Status to view the device status.
11.2 Enable System Log Service
The security audit logs refer to the security operaon logs. You can search and analyze the security
log les of the device so as to nd out the illegal intrusion and troubleshoot the security events.
Security audit logs can be saved on device internal storage. The log will be saved every half hour
aer device boong. Due to limited storage space, you are recommended to save the logs on a log
server.
Steps
1.
Go to Conguraon → Device Conguraon → System Conguraon → Service .
2.
Check Enable syslog.
3.
Enter IP and Port of the log server.
4.
Click Save.
Result
The device will upload the security audit logs to the log server regularly.
11.3 Upgrade
Upgrade the system when you need to update the device version.
Before You Start
Prepare the upgrade le.
Steps
1.
Go to Conguraon → Device Conguraon → System Maintenance → Upgrade .
2.
Click Browse to select the upgrade
le.
3.
Click Upgrade.
Smart On-Street ANPR Camera User Manual
39