Network Video Recorder User Manual
127
Bad Sector Detection
And you can click Error info button to see the detailed damage information.
And you can also pause/resume or cancel the detection.
Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialized or
Abnormal.
Go to Menu > Configuration > Exceptions.
Select the Exception Type to HDD Error from the dropdown list.
Click the checkbox(s) below to select the HDD error alarm type (s), as shown in
Figure 10-10.
The alarm type can be selected to: Audible Warning, Notify Surveillance Center, Send
Email and Trigger Alarm Output. Please refer to Chapter 8.8 Setting Alarm
Response Actions.
To Next Page
Loading...
