Network Video Recorder User Manual
24
After logging out, the monitor turns to the live view mode and if you want to do
some operation, you need to enter user name and password tog in again.
Go to Menu > Shutdown.
Logout
Click Logout.
After you have logged out the system, menu operation on the screen is invalid. It is
required to input a user name and password to unlock the system.
Resetting Your Password
When you forget the password of the admin, you can reset the password by
importing the GUID file. The GUID file must be exported and saved in the local U-
flash disk after you have activated the device (refer to Chapter 2.1.2 Activating Your
Device).
On the user login interface, click Forget Password to enter the Reset Password
interface.
Please insert the U-flash disk stored with the GUID file to the NVR before resetting
password.
Reset Password
To Next Page
Loading...
