Network Video Recorder User Manual
50
Select a patrol in the dropdown list and click the Call Patrol button to call it.
You can click the Stop Patrol button to stop calling it.
Customizing Patterns
Purpose:
Patterns can be set by recording the movement of the PTZ. You can call the pattern
to make the PTZ movement according to the predefined path.
Go to Menu > Camera > PTZ.
PTZ Settings
Choose pattern number in the dropdown list.
Click Start and click corresponding buttons in the control panel to move the PTZ
camera, and click Stop to stop it.
The movement of the PTZ is recorded as the pattern.
Calling Patterns
Purpose:
Follow the procedure to move the PTZ camera according to the predefined patterns.
Click PTZ in the lower-right corner of the PTZ setting interface;
Or press the PTZ button on the front panel or click the PTZ Control icon in
the quick setting bar, or select the PTZ option in the right-click menu to show
the PTZ control panel.
Click the button to show the general settings of the PTZ control.
To Next Page
Loading...
