Network Video Recorder User Manual
124
Confirm Initialization
Select OK to start initialization.
Status changes to Initializing
After the HDD has been initialized, the status of the HDD will change from
Uninitialized to Normal.
HDD Status Changes to Normal
Initializing the HDD will erase all data on it.
Configuring Quota Mode
Purpose:
Each camera can be configured with allocated quota for the storage of recorded files.
Go to Menu > HDD > Advanced.
Set Mode to Quota, as shown in Figure 10-6.
The NVR must be rebooted to enable the changes to take effect.
To Next Page
Loading...
