Network Video Recorder User Manual
96
Setting Sensor Alarms
Purpose:
Set the handling action of an external sensor alarm.
Go to Menu> Configuration > Alarm.
Select Alarm Input tab to enter Alarm Input Settings interface.
Alarm Status Interface of System Configuration
Set up the handling action of the selected alarm input.
Check Enable and click Setting to set up its alarm response actions.
Alarm Input Setup Interface
(Optional) Enable the one-key disarming for local alarm input 1 (Local<-1).
1) Check Enable One-Key Disarming.
2) Click Settings to enter the linkage action settings interface.
3) Select the alarm linkage action (s) you want to disarm for local alarm input
1. The selected linkage actions include the Full Screen Monitoring, Audible
Warning, Notify Surveillance Center, Send Email and Trigger Alarm Output.
When the alarm input 1 (Local<-1) is enabled with one-key disarming, the other alarm input settings are not
configurable.
To Next Page
Loading...
