Network Video Recorder User Manual
131
Click the Apply button to save the settings.
Configuring Video Parameters
Purpose:
You can customize the image parameters including the brightness, contrast,
saturation, image rotate and mirror for the live view and recording effect.
Go to Menu > Camera > Image.
Image Settings Interface
Select the camera to set image parameters.
Adjust the slider or click on the up/down arrow to set the value of the brightness,
contrast or saturation.
Select the Enable Rotate function to Clockwise 270 degrees or OFF. When OFF is
selected, the image is restored to original.
Select the Mirror Mode to Left-Right, Up-Down, Center or OFF. When OFF is
selected, the image is restored to original.
The Rotate and Mirror functions must be supported by the connected IP
camera.
The image parameters adjustment can affect both the live view and the
recording quality.
Click Apply to save the settings.
To Next Page
Loading...
