Network Video Recorder User Manual
61
Draw the Schedule
Click Apply to validate the settings.
(Optional) If the settings can also be used to other channels, click Copy, and then
choose the channel to which you want to copy.
Click Apply to save the settings.
Configuring Motion Detection Recording
Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once
a motion detection event takes place, the NVR can analyze it and do many actions to
handle it. Enabling motion detection function can trigger certain channels to start
recording, or trigger full screen monitoring, audio warning, notify the surveillance
center and so on. In this chapter, you can follow the steps to schedule a record which
triggered by the detected motion.
Go to Menu > Camera > Motion.
Motion Detection
To Next Page
Loading...
