Network Video Recorder User Manual
94
Chapter 8 Alarm Settings
Setting Motion Detection Alarm
Go to Menu > Camera > Motion to enter Motion Detection interface of Camera
Management and choose a camera you want to set up motion detection.
Set up detection area and sensitivity.
Tick Enable Motion Detection, and use the mouse to draw detection area(s) and
drag the sensitivity bar to set sensitivity.
By default, the motion detection is enabled and configured in full screen.
Click and set alarm response actions.
Motion Detection Setup Interface
By default, the feature of Dynamic Analysis for Motion is enabled. When the motion
detection triggered frame (green) for the moving targets in the motion detection
area will be displayed on the live video.
Click Trigger Channel and select one or more channels which will start to record
or become full-screen monitoring when motion alarm is triggered, and click Apply
to save the settings.
To Next Page
Loading...
