Network Video Recorder User Manual
130
Configuring Privacy Mask
Purpose:
You are allowed to configure the four-sided privacy mask zones that cannot be
viewed by the operator. The privacy mask can prevent certain surveillance areas to
be viewed or recorded.
Go to Menu > Camera > Privacy Mask.
Select the camera to set privacy mask.
Click the checkbox of Enable Privacy Mask to enable this feature.
Privacy Mask Settings Interface
Use the mouse to draw a zone on the window. The zones will be marked with
different frame colors.
Up to 4 privacy masks zones can be configured and the size of each area can be
adjusted.
The configured privacy mask zones on the window can be cleared by clicking the
corresponding Clear Zone1-4 icons on the right side of the window, or click Clear
All to clear all zones.
Set Privacy Mask Area
To Next Page
Loading...
