Network Video Recorder User Manual
138
Chapter 13 Others
Configuring General Settings
Purpose:
You can configure the BNC output standard, VGA output resolution, mouse pointer
speed through the Menu > Configuration > General interface.
Go to Menu >Configuration> General。
Select the General tab.
General Settings Interface
Configure the following settings:
Language: The default language used is English.
Resolution: Configure the VGA resolution and HDMI resolution respectively.
Time Zone: Select the time zone.
Date Format: Select the date format.
System Date: Select the system date.
System Time: Select the system time.
Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
Enable Wizard: Enable/disable the Wizard when the device starts up.
Enable Password: Enable/disable the use of the login password.
Click Apply to save the settings.
To Next Page
Loading...
